Elevate Your Space with Precision and Elegance
With their sleek lines and unparalleled strength, corner aluminium extrusions are the architectural marvels that elevate modern structures. Whether you’re a seasoned professional or a DIY enthusiast, this comprehensive guide empowers you with the knowledge and techniques to achieve a seamless installation.
Materials Required:
Corner aluminium extrusions
Silicone sealant
Adhesive tape
Measuring tape
Mitre saw
Drill
Screws
Step 1: Planning and Measurement
Measure and mark the desired locations for the extrusions. Ensure accuracy by using a precise measuring tape.
Step 2: Cutting the Extrusions
Use a mitre saw to cut the extrusions to the correct angles. For a pristine finish, hold the saw steady and apply minimal pressure.
Step 3: Applying Adhesive
Apply a generous bead of adhesive tape to the back of the extrusions. This will provide a secure bond between the extrusion and the surface.
Step 4: Positioning the Extrusions
Carefully align the extrusions with the marked locations and press firmly to ensure proper adhesion.
Step 5: Drilling and Screwing
Drill pilot holes through the extrusions and secure them in place using screws. Ensure the screws are flush with the surface for a polished finish.
Step 6: Finishing Touches
Apply a thin layer of silicone sealant along the seams and corners to create a weatherproof and durable seal. Trim any excess sealant with a sharp knife.
Tips for Success:
Use sharp tools for precise cuts and clean edges.
Wear safety glasses and gloves when working with tools.
Test the fit of the extrusions before applying adhesive to ensure proper alignment.
Allow ample time for the sealant to cure according to the manufacturer’s instructions.
By following these meticulous steps, you can effortlessly transform your space with the refined beauty and structural integrity of corner aluminium extrusions. Embrace the precision, elevate your designs, and create a masterpiece that stands the test of time.
